HomeAboutGalleryContact
Home » What We Offer » Solar Water Heating » Technical Specifications

Technical Specifications

Material of Heater Pipe: T2 copper
Insulation material: rock wool
Thickness of rock wool: 96mm
Density of rock wool: 80kg/m³
Seal: silicon rubber
Hydraulic connections: copper pipe
Max. operation pressure: 8 bar
Test pressure: 10 bar
Max. working temperature: 220°
Min. working temperature:-40°
Max. tilt angle: 45°
Min. tilt angle: 25°
Thickness of water carrying tube: 0.8mm
Surface finish: powder coated
Permissible wind: 30m/s
Snow load: 30cm ( thickness )

 

International Certification and Compliance:
Swiss SPF Certificate
French CSTB Construction Product Certificate
ISO 9002:94 Certificate of Registration
ISO 9001:2000 Certificate of EWC Quality System
CE Certificate for Solar Water Heating
ISC International Certification (SAI Global equivalent but not currently required in NZ)

 

Local Certification and Compliance:
SIA Accredited SWH Supplier and Installer for peace of mind.
EECA Participant provides access to the Government’s Grants and Loan Scheme.
AS/NZS2712:2007 Applied Research tested and compliant for ease of obtaining a building consent
G12/AS2 Meets Acceptable Solution amendment to the Building Code.

 

System description:

Open Loop System:

An Open Loop System cycles water from the bottom of the cylinder to the Solar Collector where it is heated and then cycled back into the cylinder raising the overall water temperature. This same water then flows on to the tap or shower on demand.

Typical Applications of an open loop system would be most new houses and retrofits.


System Controller:

Ecopoint uses “Intelligent Electronic Controllers” to ensure that the every system installed performs to its peak potential in all conditions and throughout the entire year. The controllers are designed to cope with the varying demands of individuals and the complex demands of industry by utilising the single chip micyoco (SMC) technology of the American Motorola Company which is designed with PID comparison, integral calculus and the differential calculus regulation principle.

Type name ECO20S  ECO30S
Dimension(mm×mm×mm) 1980×950×128 1980×1590×128
Weight(kg) 60.48
88.79
Number of tubes 20
30
Absorb area(m²) 1.62
2.43
 

 

SWH Controller Manuals